Redesign Knob Transfer – Vintage Rose

How to use the transfer images:

1. The prints are either in a tube or in a plastic film package. A wooden fixing spatula is included in the tube.
2. Inauguration:
1. TUBE: Large and medium-sized transfers are in a tube. Carefully open the tube from the end and take out the rolled-up transfer image. The roll contains 2-3 sheets. Open the roll carefully on the table and make sure that the background paper stays stuck to the transparent transfer film.
2. PLASTIC FILM PACKAGING: small transfers are on the sheets. Take out the transfer image sheet and cut out the desired parts from the sheet. Make sure that the background paper is stuck to the transparent transfer film.
3. The transfer image is extremely sensitive to sticking, so be careful not to touch the mounting surface (the white surface behind the image)
4. Measure and compose the pattern on the surface you want, either completely or cut the appropriate parts from the transfer image sheet
5. Remove the background paper of the transfer image and place the transfer image with an adhesive surface on a clean, dust-free surface in the desired location.
6. Rub the image with a wooden or plastic spatula (a metal spatula is too sharp) so that the pattern adheres to the surface below.
7. Fade the edges of the transfer image by finishing the rubbing with a soft cloth (the use of odd socks!) or a transfer image pad.